Brass Tubular Rivets Pack of 250. Brass. Inside diameter 4 mm. For use with our hole and rivet tong. 5,20GBP availabilityavailable in 3 weeks, place your order now
100 Push-Pins Also from Moore. This is the best version of the famous Original Moore Push-pin. The head is made of aluminium and the pin of stainless steel. 100 pins in a plastic box. The pin length is 1,3 centimeters and the complete length including the pin is 2,5 centimeters. 15,50GBP availabilityin stock, can be delivered in 6-7 days
From pistols to staplers.
In 1934 the Spanish firearms factory El Casco started to produce civil products and subsequently acquired an excellent reputation. However, this was associated with high prices due to the preferences of their designers for high-gloss chrome-plated and gold-plated surfaces as well as the excellent processing. All parts are precisely coordinated to match each other and hand-adjusted. Whether you believe it or not, the following instruments, the table stapler in unpretentious black and the plier stapler with matted steel housing are among the most reasonably priced models.
The M10 table stapler still bears clues to its origin (the carrier originally was intended to become a gun barrel). The M10 (stapling, pinning or nailing) does not only staple paper, but also foils and fabrics. As it can be flipped open by 180 degrees it can be used as tacker, too.
The plier stapler M83 softly staples up to 30 sheets of paper (stapling and pinning) and, with its visible mechanics and the matted steel housing, it is also a feast for your eyes.
Like a rifle, both can be totally disassembled and each single part can be replaced. 12,50GBP availabilityin stock, can be delivered in 6-7 days
Steel Tape Dispenser This robust tape dispenser owes its considerable weight to the massive steel base. With its rubber feet it will not slip. It comes with two rollers for adhesive tape up to 25 mm wide with the standard inner diameters of 25 and 75 mm (with a max. outer diameter of
Painted sheet steel. 2 plastic rollers. L 16 x W 4.5 x H 10 cm. Weight 1.1 kg.
Comes without adhesive tape. 31,00GBP availabilityin stock, can be delivered in 6-7 days
Coccoina Paper Glue The contents of the tin give off an
agreeable scent of almonds which older
users will recall from „Pelikanol“,
the earlier German product in wide use.
These practical universal adhesives for
home and office are based on potato
starch and have been in use since the
1920s. One has survived in Italy with
the name of „Colla bianca solida per ufficio
moderno“. A nice touch: The tin
features a cylinder in the middle to hold
a brush for applying the adhesive.
Container with 125 g. 4,80GBP
Basic price: 3,84 GBP/100g
availabilityin stock, can be delivered in 6-7 days
Width 19 mm. Inside diameter 75 mm. 1 roll with 65.8 m.
Cellulose acetate adhesive tape. These cellulose acetate adhesive tape made of an early developed plastic made of pulp are almost, but not fully, clear. Mirror and shadow formation can therefore be avoided while copying. The tapes are writable and will not start yellowing for many years. Due to the coating of the non-adhesive side, they are easy to unroll, while the adhesive side will not lose its bond strength.
We offer two variants: the permanent adhesive tape for permanent bonding as well as a tape which can be removed from paper and cardboard surfaces without leaving residue, for temporary bonding. They have always been and are still made in the USA.
The large rolls have an inside diameter of 75 mm and do not fit into all adhesive tape dispensers. 10,50GBP
Basic price: 0,16 GBP/1m
availabilityavailable in 2 weeks, place your order now
The folding stick is a traditional bookbinding tool, which is also useful, for example, as a folding and bending aid or to press on adhesive tapes during your daily office and handcraft work.
The ends can be used to make a groove in carton so that it can be bent more easily. Nowadays folding sticks are made of plastic, but our stick is made of bones –the original material. 10,00GBP availabilityin stock, can be delivered in 6-7 days
Steel Hand Punch and Riveter For punching holes (with the hole puncher
above) and riveting up to 30
sheets of paper. Stamps holes in leather
and cardboard with metal eyelets.
Comes without rivets.
Chrome-plated steel. L 16 x B 2 x H 9.5 cm. Weight 300 gr. 38,00GBP availabilityavailable in 3 weeks, place your order now
Coccoina Glue Stick Plastic cylinder with retractable glue stick.
20 g each, height 9.5 cm, diameter 2.6 cm.
Chipped almonds. For anyone who doesn't like to work with white glue – the Coccoina glue sticks. They are produced on the basis of potato starch, are non-poisonous (because they do not contain any solvents), are water-soluble and have a bewitching scent of almonds. 3,30GBP
Basic price: 16,50 GBP/100g
availabilityin stock, can be delivered in 6-7 days
Chinese Stapler Sheet steel, chrome-plated. Base with surface-protecting plastic lid. Mechanism made of steel, lever with easy-grip knob and powerful spring. 9.5 x 5.5 x 8.5 cm, weight 237 g. 68,00GBP availabilityin stock, can be delivered in 6-7 days
Wall Slate Blackboard from Fredeburg We’ve had this board made for us from pure, finely cut and polished Fredeburg slate, for writing on with chalk or slate pencil. This beautifully proportioned unframed board has been given four holes at the corners so it can be attached to the wall either flat or upright. Attachment kit provided.
37 x 60 cm. Thickness approx. 10 mm. Weight 6.7 kg. 83,00GBP availabilityin stock, can be delivered in 6-7 days
Grey Iron Tape Dispenser Grey cast iron with hammered enamel.
For small and medium sized tape rolls
with a hub diameter of 26 mm and a
width between 15 and 22 mm.
Length 14.5 cm, width 8 cm, height 5.5 cm. Weight 1.5 kg. Comes without tape. 41,00GBP availabilityin stock, can be delivered in 6-7 days
El Casco M10 Desk Stapler Steel, in black enamel, partially chromed
Rubber footed. The magazine
holds 100 24/6 staples. Comes with
Length 13.5 cm, width 5.5 cm, height 9.5 cm. Weight 380 gr. 148,00GBP availabilityin stock, can be delivered in 6-7 days
100 Paper Clips 50 paper clips of each design. They are not only decorative, but suit their purpose well.
Square size: 2,5 x 1,6 cm
Round size: approximately 2,5 cm in diameter
12,50GBP availabilityin stock, can be delivered in 6-7 days
Length 8 cm. Weight 5 g. 3,30GBP availabilityin stock, can be delivered in 6-7 days
Atoma Hole Punch The hole punch perforates A4 and A5
paper with the ATOMA perforation
which is compatible with con¬ventional
It perforates four sheets of cardboard
(90 gr. paper), up to 350 gr./m² and laminated
Made of enameled galvanized steel.
The lid of the perforations container is
made of plastic. Positioning guide for
A4, A5 and A6 formats.
Height 10 cm, width 31.5 cm, depth 12 cm. Weight 2 kg. 143,00GBP availabilityin stock, can be delivered in 6-7 days only 6 item in stock! Additional delivery expected shortly.
Aluminum Clipboard Box A robust mobile desk, so to speak, made of 1 mm lacquered aluminum sheet, indestructible and constructed practically. Below the writing surface with a remarkably strong clip and the interim tray there is enough space inside the box to store pens and a substantial volume of A4 documents (delivery notices, building plans, manuals, technical drawings).
Lacquered aluminum sheet. Clip holding approx. 150 sheets. Length 36 cm, width 23 cm, total height 7 cm. Weight 740 g. 58,00GBP availabilityin stock, can be delivered in 6-7 days
Hand and Table Embossing Press Chromed and black lacquered steel embossing press with rubberized lever. To be used as a hand embossing press or in the oak wood stand as a table embossing press. With a coupon for an embossing die with one of 16 standard typesettings for rectangular (5 x 2.5 cm) or round (diameter 4 cm) embossing dies. There is also the possibility of further individualization.
L 16 x w 6 x h 8.5 cm. Weight 270 g.
Together with your embossing press, you will receive the coupon for a rectangular or round embossing die, which you have to fill in and send to the address stated herein. After approx. two weeks, you will receive the embossing die for your embossing press via post mail (carriage free). 158,00GBP availabilityin stock, can be delivered in 6-7 days
Magnetic Board Crude steel, hot-rolled. 95 x 65 cm, weight 9.6 kg. 103,00GBP availabilityin stock, can be delivered in 6-7 days
Stainless Steel A4 Clipboard with Small Clip From Saxony. The same stainless steel clipboard with a smaller, serrated-edge clip is very popular with graphic artists and designers alike. Given its thin profile it fits comfortably into most briefcases. The clipboard holds approx. 90 sheets of paper. However, 15 to 20 sheets can be held just as firmly and carefully in place by the stop bar. The clamp can also accommodate a pencil. Stainless steel, 32 x 22 cm. Weight 580 g. 19,50GBP availabilityin stock, can be delivered in 6-7 days
Magnetic Bar Brushed stainless steel, magnetised. Length 50 cm, width 8 cm. Weight 460 g. 37,00GBP availabilityin stock, can be delivered in 6-7 days
Natural Rubber Lock Ring This lock ring works like a cable strap.
With one motion you can tie up a bundle
of pens or cable but unlike cable
straps, you can loosen it again.
Small. Ø 32 mm, approx. 55 pieces. 4,20GBP availabilityin stock, can be delivered in 6-7 days
Hercules Rubber Band A rubber band named Hercules: that’s
right. These strong and serviceable
wrappers are the alternative to standard
packaging. The colorful bands
stretch almost 500%.
Approx. 30 large, 25 x 2.5 cm,
Approx. 140 small, 15 x 1.1 cm. 20,00GBP availabilityin stock, can be delivered in 6-7 days
Magnetic Clip Box Duroplast Duroplast housing und unscrewable lid. Hard ferrite magnetic ring.
Height 6.5 cm, diameter 5.5 cm. Weight 60 g.
Delivered with up to 10 paper clips.
If one has a (no) clip. He/she will need a box.
The smart TV series hero MacGyver, who found himself in the unpleasant situation of having to defuse a bomb with a paper clip, would have been very grateful for this – and everyone who works at a desk will certainly appreciate it when binder clips, paper clips and similar metal clips can be collected and kept for controlled access. There is a magnetic ring around the inner lid opening (diameter 24 mm) of this Duroplast box. This ring attracts and holds all ferromagnetic items – even if the box should ever get knocked over in the heat of the moment. 9,30GBP availabilityin stock, can be delivered in 6-7 days only 7 item in stock! Additional delivery expected shortly.
Punching and binding. With one single device.
For safe and sustainable filing this table puncher, which is used in lawyers' and notaries' offices, can punch documents consisting of up to 36 sheets of paper and, in a subsequent process, can insert aluminum eyelets for professional binding. This eliminates the risk of tearing and means the papers can be filed in common two-hole binders. Such a device is therefore ideal for filing important documents and, above all, to ensure they remain in good condition despite very frequent use. 6,00GBP availabilityin stock, can be delivered in 6-7 days
Magnetic Board Brushed stainless steel, magnetised. Length 50 cm, width 40 cm. Weight 1.8 kg. 67,00GBP availabilityin stock, can be delivered in 6-7 days
Gold-Plated and Burnished Magnet with Handle Hard ferrite magnet diameter 36 mm. Magnetic adhesive force 100 newton. Steel housing with nickel- and gold-plated surface. Equipped with a furniture handle as hook made of burnished steel, diameter 2 cm. Radius 3 cm. Weight 65 g.
Guarantees adhesion. Even for wardrobe.
Like our handle magnet with rubber shoe, this magnet provides reliable news and availability services, not only by sticking shopping lists, absence messages ("I am away to buy some cigarettes"), post cards ("sunny greetings from the end of the world"), photos, children's paintings and the like onto the iron underground. Its special feature shows up when placed near the front door. If placed there on a magnetic board it can also be used as veritable coat hook.
Magnets must not come close to persons with pacemakers. The same applies for magnetic data carriers and mechanical watches or compasses. In addition, they should not clash from larger distances (danger of shattering). 10,50GBP availabilityin stock, can be delivered in 6-7 days
The El Casco archetype.
In the 1920s the former arms factory El Casco started the "conversion" of its production and today their products have an excellent reputation, but it can be said that you better only come close to them with sun glasses and a lot of money in your purse (due to the high-brilliant surfaces and the very high prices). We claim – we could do without. Proof 1: The table stapler M10, which was the first civil product El Casco manufactured, comes in unpretentious black and still bears clues to its origin (the carrier was originally intended to be a gun barrel) and the heavy rifle-like steel housing can be totally disassembled and, if required, each single part can be replaced. The M10 (stapling, pinning or nailing) does not only staple paper, but also foils and fabrics and, as it can be flipped open by 180 degrees, it can also be used as a tacker (on wooden surfaces). Proof 2: The M1, the small brother of the M10 and equally functional, is slightly more compact and equipped with a closed base plate (a felt coating protects the underground from being damaged) and a push mechanic that has been moved to the outside. 2,00GBP availabilityin stock, can be delivered in 6-7 days
El Casco Plier Stapler Matt chromed steel. With 1,000 staples, size 9/5.
Length 15 cm, width 2.5 cm. Height 8 cm. Weight 320 g.
This plier stapler with its matt-chromed steel housing and the visible mechanics is a feast for your eyes and, by the way, this impressive instrument can softly staple up to 30 sheets of paper. El Casco products are characterized by excellent quality; all parts are precisely coordinated to each other and hand-adjusted. 209,00GBP availabilityavailable in 3 weeks, place your order now
Carl desktop punch Case, alignment rails, punch and paper
container made of steel. Punches up
to 45 sheets (80 g sheets) from 10 to
31.5 cm long.
Length 16 cm, width 10.5 cm, height
14 cm. Weight 830 g. 41,00GBP availabilityavailable at the end of October, place your order now
Gutenberg Glue Dispenser Has always been an environmentally compatible glue for home and office. Made from gum arabic (pure vegetable rubber) and the most natural of solvents, water. It will stick for two years but after that the adhesive strength declines.
The bottle contains 60 gr. 8,40GBP
Basic price: 14,00 GBP/100g
availabilityin stock, can be delivered in 6-7 days
This letter opener is made in the bladesmith workshop Eichenlaub, based in Solingen, Germany. It has been re-created in terms of shape and processing according to a template from the 1920s and forged with the same effort as in former times by sharpening and polishing it by hand. The opener has a perfect balance thanks to a steel bolt hidden deep inside the drilled apple tree handle. The cramp that tightly bonds the blade to the handle is called "anglaise". 83,00GBP availabilityin stock, can be delivered in 6-7 days
School Slate 22 x 31 cm. Weight 460 gr.
Lined; checkered on the back.
Both sides blank. from 18,00GBP availabilityin stock, can be delivered in 6-7 days
Stainless Steel A4 Clipboard with Large Clip From Saxony. A clipboard made of 1-mm stainless steel, equipped with an extra-strong clip: it can take as much as 150 sheets of paper - and is wall-mountable. (The pen clip is not included.) Stainless steel, 32 x 22 cm. Weight 540 g. 23,00GBP availabilityin stock, can be delivered in 6-7 days
4 Paper Clamps with Magnet The paper clamps are firmly fixed to a magnet. In this sturdy construction, the clamps will hold objects up to a weight of 750 g. 2 small clamps (width 30 mm) and two large ones (width 57 mm) in each set. Magnets of 30 mm dia., adhesive strength 7.5 Newton. 13,80GBP availabilityin stock, can be delivered in 6-7 days
Powder-coated steel housing, steel mechanics, plastic pusher. Length 10 cm, width 2 cm, height 6 cm. Weight 120 g.
Not only the size counts. Small, flexible stapler.
At first this stapler may look slightly comical, but nobody will have any more doubts once it is in use. The simply constructed device can be used as a table stapler, but also as a double-use plier stapler which can be operated by thumb and index finger when directed to the front or with the base of the thumb and four fingers when directed downwards. Additionally the small stapler can be flipped over by more than 180° so that it can be used as a tacker on textile or wooden surfaces, too. In 1928 it was manufactured for the first time by Heinrich Sachs KG, Austria, and since then has proven its solid quality. Of course, it does not staple as softly as the El Casco plier stapler or a table stapler with a long lever, but it is very functional, reliable and versatile. 10,50GBP availabilitysold out / no longer available
Zenith Staple Remover 580 Neatly extracted instead of tearing: this
staple remover slips cleanly underneath
closed staples, spreading and extracting
them from the paper. The original
1958 Zenith model.
Length 13 cm. Weight 75 gr. 12,00GBP availabilitysold out / no longer available